MARKET
PACKAGING INFORMATION

Stock# Size MSDS.
MSDS Language Pref:
CASE STUDIES
Adhesive Mounting of Transmitter
Agitator Repair
Airport Runway Repair
Anti-skid Loading Dock / Floor
Auger Repair
Bag House Tube Sheet Repair
Ball Mill Infeed Shell / Head Repair
Bearing Race Repair
Bearing Race Repair
Chute Lining Repair
Coal Crusher Repair
Coal Pipe Elbow Repair
Coal Pulverizer Repair
Concrete Pump Pad Repair
Concrete Repair
Cone Valve Repair
Conveyor Belt / Pulley Lagging Repair
Conveyor Belt Repair
Conveyor Belt Repair
Coupling Bolt Repair
Devcon® R-Flex® Belt Repair
Devcon® R-Flex® Repair of 5ft Long Belt Tear
Expansion Joint Repair
Expansion Joint Repair
Exterior Pipe Repair
Fan Housing Repair
Feed Bowl Repair
Filter Plate Repair
Floatation Cell Repair
Floatation Cell Repair
Floor Coating
Floor Coating
Floor Coating
Floor Coating
Floor Coating
Floor Coating
Floor Repair
Floor Repair
Floor Repair
Floor Repair
Floor Repair Acid Environment
Hydraulic Hose Repair
Hydraulic Hose Repair
Paddle Wheel Shaft / Hub Repair
Paper Machine Component Repair
Power Pole Repair
Pump Impeller Repair
Pump Repair
Pump Repair
Pump Repair
Pump Repair
Rebuilding Motor Pad
Rebuilding Pump Pads
Rebuilding Wood Block Flooring
Rubber Roll Repair
Stainless Steel Turbine Runner Repair
Stamping Press Alignment Repair
Steel Conveyor Roll Repair
Transformer Oil Leak Repair
Transformer Oil Leak Repair
Transformer Oil Leak Repair
Urethane Wear Ring Repair
Valve Repair
Valve Repair
Water Box Channel Repair
Water Box Channel Repair
Valve Repair
Back to
 
Application Date: 
 
7/24/97
Customer:
 
Houston Power and Light
Industry:
 
Utility Power Generation
Associated Products:
Ceramic Repair Putty
Brushable Ceramic Red

 
Problem:
This valve required the replacement specialty size gate. To reduce costs, the gate was fabricated from mild steel. Mild steel would corrode and erode quickly due to salt water operation conditions. A protective or preventative maintenance coating was required.
 
Solution:
Complete valve assembly was sandblasted to a SSPC-SP5 white metal finish. Surface areas were then chemically cleaned using Cleaner Blend 300. Cavitated, eroded areas deeper than 1/8" on the valve body were filled or repaired using Ceramic Repair Putty. Following a partial cure of Ceramic Repair Putty, (4 hours), Brushable Ceramic Red was applied to the valve body and gate to a thickness of 15 mils. Following a partial cure of Brushable Ceramic Red, (4 hours), a second coat of Brushable Ceramic Blue was applied, at 15 mils. Two coats of Brushable Ceramic provides a long lasting, abrasion and corrosion resistant, low co-efficient to friction, protective surface coating.