MARKET
PACKAGING INFORMATION

Stock# Size MSDS.
MSDS Language Pref:
CASE STUDIES
Adhesive Mounting of Transmitter
Agitator Repair
Airport Runway Repair
Anti-skid Loading Dock / Floor
Auger Repair
Bag House Tube Sheet Repair
Ball Mill Infeed Shell / Head Repair
Bearing Race Repair
Bearing Race Repair
Chute Lining Repair
Coal Crusher Repair
Coal Pipe Elbow Repair
Coal Pulverizer Repair
Concrete Pump Pad Repair
Concrete Repair
Cone Valve Repair
Conveyor Belt / Pulley Lagging Repair
Conveyor Belt Repair
Conveyor Belt Repair
Coupling Bolt Repair
Devcon® R-Flex® Belt Repair
Devcon® R-Flex® Repair of 5ft Long Belt Tear
Expansion Joint Repair
Expansion Joint Repair
Exterior Pipe Repair
Fan Housing Repair
Feed Bowl Repair
Filter Plate Repair
Floatation Cell Repair
Floatation Cell Repair
Floor Coating
Floor Coating
Floor Coating
Floor Coating
Floor Coating
Floor Coating
Floor Repair
Floor Repair
Floor Repair
Floor Repair
Floor Repair Acid Environment
Hydraulic Hose Repair
Hydraulic Hose Repair
Paddle Wheel Shaft / Hub Repair
Paper Machine Component Repair
Power Pole Repair
Pump Impeller Repair
Pump Repair
Pump Repair
Pump Repair
Pump Repair
Rebuilding Motor Pad
Rebuilding Pump Pads
Rebuilding Wood Block Flooring
Rubber Roll Repair
Stainless Steel Turbine Runner Repair
Stamping Press Alignment Repair
Steel Conveyor Roll Repair
Transformer Oil Leak Repair
Transformer Oil Leak Repair
Transformer Oil Leak Repair
Urethane Wear Ring Repair
Valve Repair
Valve Repair
Water Box Channel Repair
Water Box Channel Repair
Agitator Repair
Back to
 
Application Date: 
 
5/15/97
Customer:
 
Western Zirconium
Industry:
 
Petrochemical Chemical Manufacturing
Associated Products:
1 Minute™ Epoxy

 
Problem:
This agitator would receive extreme corrosion and pitting from mixing a solution of 35% Hydrolchloric Acid. Previous method was to replace agitator when worn. Replacement cost for the agitator was estimated at $3K.
 
Solution:
The complete agitator was sandblasted to a SSPC-SP5 white metal finish. All repair and coating areas were chemically cleaned using Cleaner Blend 300. Ceramic Repair was mixed and applied to all corroded and cavitated areas deeper than 1/8". Following a partial cure, (4 hours), Brushable Ceramic Blue was applied to a thickness of 30 mils. Following a partial cure, (4 hours), a second coat of Brushable Ceramic Red was applied, again to a thickness of 30 mils. Brushable Ceramic encapsulated the repair areas and provided a long lasting, smooth chemical resistant coating. Devcon's repair cost was $500.