Conveyor Belt RepairBack to
Flexane® Belt Repair Kit
Flexane® 80 Putty
This primary haul conveyor belt received a 1/4" x 1/4" gouge along the entire belt (3,000 ft. long) from a dropped chute. The damage was so severe that the belt was near torn through.
Repair area was roughened using a grinder a wire wheel attachment. Surface area was then chemically cleaned using Cleaner Blend 300. FL20 primer was applied and allowed to cure or dry for 15 minutes. Flexane 80 Putty was applied to the damaged or gouged area, then smoothed and contoured using a putty knife.