Floor CoatingBack to
||Bender Engineering Inc.|
Epoxy Coat™ 7000 (Non VOC)
The floor area of this laboratory would receive extreme damage from incidental contact with mild chemicals. The current alkyd paint was peeling in several locations.
All loose peeling paint was removed using a paint scraper. The complete surface area was then roughened using a blastrac machine. Exposed cracks were filled using Floor Patch. Following a partial cure of Floor Patch, (4 hours), Epoxy Coat 7000 was applied to a thickness 0f 8 mils using a 1/4 nap paint roller. Epoxy Coat 7000 provided a long lasting chemical resistant protective coating.