Medium Strength Threadlocker BLUE Gel in the GEL TWIST™ applicator

The patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it...on the part! Gel formula provides "liquid-reliability" without drips, globs, mess or waste. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.

 Download Tech Data Sheet

High Strength Threadlocker RED Gel in the GEL TWIST™ applicator

The patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it...on the part! Gel formula provides "liquid-reliability" without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications. Especially well suited for permanently locking studs. Locks against vibration loosening. Requires extra effort or special tools for removal.

 Download Tech Data Sheet

Medium Strength Threadlocker BLUE

All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Mil-Spec (S-46163A) Type II, Grade N.

 Download Tech Data Sheet

Surface Insensitive Threadlocker BLUE

Medium/High strength threadlocker for general-purpose applications. Especially well-suited for 1/4 inch to 3/4 inch (6mm to 20mm) fasteners that have a slight oil film. Prevents vibration loosening.

 Download Tech Data Sheet

Permanent Strength Threadlocker RED

A permanent, high strength threadlocker that is applied to fasteners 3/8 inch to 1 inch (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts. Mil-Spec (S-46163A) Type II, Grade O.

 Download Tech Data Sheet

High Strength Threadlocker RED

High strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well suited for permanently locking studs. Locks against vibration loosening. Removable with heat and hand tools. Mil-Spec (S-46163A) Type I, Grade K.

 Download Tech Data Sheet

High Temperature Threadlocker RED

Hi-temp/hi-strength threadlocker for heavy-duty applications. Prevents bolts 3/8 inch to 1 1/2 inch (10mm to 38mm) from loosening due to shock, severe vibration and heat stress. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.

 Download Tech Data Sheet

Large Diameter Threadlocker RED

A high strength adhesive for locking and sealing large bolts and studs 1 inch (25mm+) or larger in diameter. Heat may be required to weaken bond before parts can be disassembled. Mil-Spec (S-46163A) Type I, Grade L.

 Download Tech Data Sheet

Penetrating Grade Threadlocker GREEN

A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2 inch (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly. Mil-Spec (S-46163A) Type III, Grade R.

 Download Tech Data Sheet

Surface Prep Activator for Anaerobics

Speeds cure of Permatex® Threadlockers, Thread Sealants, Retaining Compounds and anaerobic Gasket Makers. Recommended for use during cold weather for improved adhesion.

 Download Tech Data Sheet