|
APPLICATION
 Mouse-over products for more information
PRODUCT DESCRIPTION
Medium Strength Threadlocker BLUE Gel in the GEL TWIST™ applicatorThe patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it...on the part! Gel formula provides "liquid-reliability" without drips, globs, mess or waste. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4 inch to 1 inch (6mm to 25mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Download Tech Data SheetPRODUCT DESCRIPTION
High Strength Threadlocker RED Gel in the GEL TWIST™ applicatorThe patent-pending GEL TWIST™ pin-point applicator puts the Threadlocker where you want it...on the part! Gel formula provides "liquid-reliability" without drips, globs, mess or waste. High strength threadlocker for heavy-duty applications. Especially well suited for permanently locking studs. Locks against vibration loosening. Requires extra effort or special tools for removal. Download Tech Data SheetPRODUCT DESCRIPTION
Medium Strength Threadlocker BLUEAll-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4 inch to 3/4 inch (6mm to 20mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts from loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly. Mil-Spec (S-46163A) Type II, Grade N. Download Tech Data SheetPRODUCT DESCRIPTION
Surface Insensitive Threadlocker BLUEMedium/High strength threadlocker for general-purpose applications. Especially well-suited for 1/4 inch to 3/4 inch (6mm to 20mm) fasteners that have a slight oil film. Prevents vibration loosening. Download Tech Data SheetPRODUCT DESCRIPTION
Permanent Strength Threadlocker REDA permanent, high strength threadlocker that is applied to fasteners 3/8 inch to 1 inch (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts. Mil-Spec (S-46163A) Type II, Grade O. Download Tech Data SheetPRODUCT DESCRIPTION
High Strength Threadlocker REDHigh strength threadlocker for heavy-duty applications 3/8 inch to 1 inch (10mm to 25mm). Especially well suited for permanently locking studs. Locks against vibration loosening. Removable with heat and hand tools. Mil-Spec (S-46163A) Type I, Grade K. Download Tech Data SheetPRODUCT DESCRIPTION
High Temperature Threadlocker REDHi-temp/hi-strength threadlocker for heavy-duty applications. Prevents bolts 3/8 inch to 1 1/2 inch (10mm to 38mm) from loosening due to shock, severe vibration and heat stress. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools. Download Tech Data SheetPRODUCT DESCRIPTION
Large Diameter Threadlocker REDA high strength adhesive for locking and sealing large bolts and studs 1 inch (25mm+) or larger in diameter. Heat may be required to weaken bond before parts can be disassembled. Mil-Spec (S-46163A) Type I, Grade L. Download Tech Data SheetPRODUCT DESCRIPTION
Penetrating Grade Threadlocker GREENA low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners ranging from #2 to 1/2 inch (2.2 to 12mm) in size. Localized heating and hand tools are needed for disassembly. Mil-Spec (S-46163A) Type III, Grade R. Download Tech Data SheetPRODUCT DESCRIPTION
Bearing Mount for Close FitsA low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit assemblies. Prevents fretting and corrosion. Up to 3,000 PSI holding power. Download Tech Data SheetPRODUCT DESCRIPTION
Bearing Mount for Relaxed FitsHigh strength, medium viscosity anaerobic adhesive for slip fit assemblies. Provides 2,800 PSI shear strength on steel. Prevents fretting and corrosion. Fixture time is 10 minutes at room temperature. Download Tech Data SheetPRODUCT DESCRIPTION
Surface Prep Activator for AnaerobicsSpeeds cure of Permatex® Threadlockers, Thread Sealants, Retaining Compounds and anaerobic Gasket Makers. Recommended for use during cold weather for improved adhesion. Download Tech Data Sheet |
Threadlocking/Retaining
Permatex® Threadlocking Adhesives are fast-curing Anaerobics with excellent gap-filling, capillary action, and chemical resistance. Permatex ® Retaining Compounds are designed to bond non-threaded, cylindrical, metal assemblies by filling the voids between close-fitting metal parts.Click Here to View Products
- High Strength Threadlocker RED
- High Strength Threadlocker RED Gel in the GEL TWIST™ applicator
- Medium Strength Threadlocker BLUE
- Medium Strength Threadlocker BLUE Gel in the GEL TWIST™ applicator
- Permanent Strength Threadlocker RED
- High Temperature Threadlocker RED
- Surface Insensitive Threadlocker BLUE
- Penetrating Grade Threadlocker GREEN
- Large Diameter Threadlocker RED
- Bearing Mount for Close Fits
- Bearing Mount for Relaxed Fits
- Surface Prep Activator for Anaerobics
